Low Voltage Display Lighting

Display lighting is an essential part of any display.

Low-voltage display lighting designed to enhance retail and point of sale displays. Quick and easy to install as there is no need to use special cables, our lighting uses standard cables or rods retaining strength and load bearing capacity. A complete range of display lighting that compliments the cable and rod display system has been designed to just clip on the display just above a poster or shelf.

All lighting kits come complete with everything required to just clip into position, all you need to complete the installation is an electrical spur positioned within 2 metres of the transformer.

 

cantilevered light

Cantilevered Light (50w)

Stylish light that illuminates from one side of a display - ideal for lighting graphic panels or posters up to A2 in size. The lamp has an 180° adjustable head and projects 150 mm in front of rods or cables.

Supplied complete with:

  • 1 x LD50/24 50w lamp
  • 1 x LT60-12 60VA 12v transformer
  • 2 x CS08 power connectors

When adding low-voltage lighting decide where you are going to position the transformer as an electrical supply will be required within 2 metres of the display. Click here for lighting diagram.
Single Cantilevered 50w Light Price Quantity:
Single Cantilevered 50w Light (to fit 6mm rod display for graphics up to A2) £79.70
Single Cantilevered 50w Light (to fit 1.5mm cable display for graphics up to A2) £91.65
   

 

Twin Cantilevered Light

Twin Cantilevered Light (2 x 50w)

Stylish light that illuminates from one side of a display - ideal for lighting graphic panels or posters up to A1 in size. The lamps have an 180° adjustable head and project 150 mm in front of rods or cables.

Supplied complete with:

  • 2 x LD50/24 50w lamps
  • 1 x LT100-24 100VA 24v transformer
  • 2 x CS08 power connectors

When adding low-voltage lighting decide where you are going to position the transformer as an electrical supply will be required within 2 metres of the display. Click here for lighting diagram.
Twin Cantilevered 50w Lights Price Quantity:
Twin Cantilevered 50w Lights (to fit 6mm rod display for graphics up to A1) £99.95
Twin Cantilevered 50w Lights (to fit 1.5mm cable display for graphics up to A1) £111.90
   

 

Wirelight

Single Wirelight (50w)

An elegant yet cost-effective way to illuminate any display supported on cables. The lamps project 150mm from cables, are non-adjustable and angled straight down to give a good overall spread of light.

Standard cable centres for graphics up to: A4 (244mm), A3 (331mm), A2 (454mm) and A1 (628mm), or order KLW6C which is adjustable to any size up to 678mm.

Supplied complete with:

  • 1 x LD50/38 50W lamp
  • 1 x LT60-12 transformer
  • 2 x CS08 power connectors and supports
  • 1 x LHR/BL cool-to-the-touch black silicone ring for extra elegance

When adding low-voltage lighting decide where you are going to position the transformer as an electrical supply will be required within 2 metres of the display. Click here for lighting diagram.
Single 50 watt Wirelight Price Quantity:
Single 50 watt Wirelight (for A4 centres) £57.25
Single 50 watt Wirelight (for A3 centres) £57.50
Single 50 watt Wirelight (for A2 centres) £57.75)
Single 50 watt Wirelight (for A1 centres) £58.00
Single 50 watt Wirelight (for up to 678mm centres) £58.25
   

 

For more information or advice on these products call:

or use the quote form to tell us your requirements, we can suggest the most appropriate solution for your display needs.